2016-07-282016-07-282016-07-10ICES_2016_345http://hdl.handle.net/2346/67678United StatesAdvanced Fuel Research, Inc.NASA Johnson Space Center402ICES402: Extravehicular Activity: PLSS SystemsVienna, AustriaThe 46th International Conference on Environmental Systems was held in Vienna, Austria, USA on 10 July 2016 through 14 July 2016.Marek A. Wójtowicz, Advanced Fuel Research Inc., USAJoseph E. Cosgrove, Advanced Fuel Research Inc., USAMichael A. Serio, Advanced Fuel Research Inc., USAMonique S. Wilburn, NASA Johnson Space Center, USAResults are presented on the development of a reversible carbon sorbent for trace-contaminant (TC) removal for use in Extravehicular Activities (EVAs), and more specifically in the Primary Life Support System (PLSS). The current TC-control technology involves the use of a packed bed of acid-impregnated granular charcoal, which is deemed non-regenerable, while the carbon-based sorbent under development in this project can be regenerated by exposure to vacuum at room temperature. Data on concurrent sorption and desorption of ammonia and formaldehyde, which are major TCs of concern, are presented in this paper. A carbon sorbent was fabricated by dry impregnation of a reticulated carbon-foam support with polyvinylidene chloride, followed by carbonization and thermal oxidation in air. Sorbent performance was tested for ammonia and formaldehyde sorption and vacuum regeneration, with and without water present in the gas stream. It was found that humidity in the gas phase enhanced ammonia-sorption capacity by a factor larger than two. Co-adsorption of ammonia and formaldehyde in the presence of water resulted in strong formaldehyde sorption (to the point that it was difficult to saturate the sorbent on the time scales used in this study). In the absence of humidity, adsorption of formaldehyde on the carbon surface was found to impair ammonia sorption in subsequent runs; in the presence of water, however, both ammonia and formaldehyde could be efficiently removed from the gas phase by the sorbent. The efficiency of vacuum regeneration could be enhanced by gentle heating to temperatures below 60 °C.application/pdfengPrimary Life Support System (PLSS)ammoniaformaldehydetrace contaminantsadsorptionvacuum regenerationPresentation