Visible-Light-Responsive Catalysts Using Quantum Dot- Modified TiO2 for Air and Water Purification
| dc.creator | Coutts, Janelle L. | |
| dc.creator | Hintze, Paul E. | |
| dc.creator | Clausen, Christian A. | |
| dc.creator | Richards, Jeffrey T. | |
| dc.date.accessioned | 2014-10-20T19:17:16Z | |
| dc.date.available | 2014-10-20T19:17:16Z | |
| dc.date.issued | 2014-07-13 | |
| dc.description | The 44th International Conference on Environmental Systems was held in Tuscon, Arizona, USA on 13 July 2014 through 17 July 2014. | |
| dc.description.abstract | Photocatalysis, the oxidation or reduction of contaminants by light-activated catalysts, utilizing titanium dioxide (TiO2) as the catalytic substrate has been widely studied for trace contaminant control in both air and water applications. The interest in this process is due primarily to its low energy consumption and capacity for catalyst regeneration. Titanium dioxide requires ultraviolet light for activation due to its relatively large band gap energy of 3.2 eV. Traditionally, Hg-vapor fluorescent light sources are used in PCO reactors; however, the use of mercury precludes the use of this PCO technology in a spaceflight environment due to concerns over crew Hg exposure. The development of a visible-light- responsive (VLR) TiO2-based catalyst would eliminate the concerns over mercury contamination. Further, VLR development would allow for the use of ambient visible solar radiation or highly efficient LEDs, both of which would make PCO approaches more efficient, flexible, economical, and safe. Though VLR catalyst development has been an active area of research for the past two decades, there are few commercially available VLR catalysts. Those VLR catalysts that are commercially available do not have adequate catalytic activity, in the visible region, to make them competitive with those operating under UV irradiation. This study was initiated to develop more effective VLR catalysts through a novel method in which quantum dots (QD) consisting of narrow band gap semiconductors (e.g., CdS, CdSe, PbS, ZnSe, etc.) are coupled to TiO2 via two preparation methods: 1) photodeposition and 2) mechanical alloying using a high-speed ball mill. A library of catalysts was developed and screened for gas and aqueous phase applications using ethanol and 4-chlorophenol as the target contaminants, respectively. Both target compounds are well studied in photocatalytic systems and served as model contaminants for this research. Synthesized catalysts were compared in terms of preparation method, nature of the quantum dots, and dosage of quantum dots. | en_US |
| dc.identifier.isbn | 978-0-692-38220-2 | |
| dc.identifier.other | ICES-2014-028 | |
| dc.identifier.uri | http://hdl.handle.net/2346/59639 | |
| dc.language.iso | eng | en_US |
| dc.publisher | 44th International Conference on Environmental Systems | en_US |
| dc.title | Visible-Light-Responsive Catalysts Using Quantum Dot- Modified TiO2 for Air and Water Purification | en_US |
| dc.type | Presentation | en_US |